SW01 Single Station Servo Needle Winding Machine

Introduction：

It’s suitable for brushless motor stator coil winding, manually loading/unloading, the machine automatically complete mold clamping, winding, wire clamping and cutting, it can achieve multi tapping(set on HMI). The slot No. and turn No. can be set on HMI. It can do multi strands wire parallel winding, machine has remote diagnosis function.

Specification:

Wire dia.：0.20-1.2 mm

Winding speed: 0-350 r/min adjustable

Winding Method: Needle winding

Stack length: 10-180mm

Stator ID: 50-180mm

Stator OD: 70-210mm

Air pressure: 0.5MPa～1 MPa

Voltage: 380V/50HZ three phase four wires

Power: 9.5 KW

Dimension:L1200*W750*H1900)

Weight: About 400kg

Main configuration:

Control system: Leisai motion control system

HMI: Weilun

Cylinder: SMC or AirTac

Electromagnetic valve: SMC or AirTac

Servo: Panasonic

Bearing: NSK/ NTN

Ball screw rod, linear guide rail: Hi-win, TBI

Coupling: Miki

Technical requirement to be reached:

After winding, the copper wire stretching rate is less than 7%.

Salty water test: within 10mA at 1min

Noise: less than 70dB